Data

Information

Product description
High-quality, very easy-to-process, elasto-plastic sealant
based on acrylic dispersion for sealing joints, seams, cracks and
cracks. Can be painted over after 30 minutes and can be tightly meshed. Indoor and outdoor
applicable. (Acrylic sealant is not suitable for permanently wet places and for
permanently elastic seals. Use Bison Silicone sealant for this).

Area of application
Suitable for sealing low-acting joints, seams and cracks at
door and window frames, window sills, prefabricated elements, stairs, skirting boards,
walls, plasterboards, ceilings, corrugated sheets and transit pipes. Also suitable for
for sealing cracks and fissures in interior walls. Adheres to brick,
(gas) concrete, brickwork, plasterwork, wood, glass, ceramic tiles, metals
and hard PVC. Does not adhere to bitumen, PP, PE, P.T.F.E. and silicones. For sealing
For glazing use Bison Glazing sealant. Not suitable for bitumen,
polyethylene (PE), polypropylene (PP), P.T.F.E. and silicones.

Properties
- Paintable after 30 minutes
- Tight-fitting
- Easy to process
- Moisture-resistant
- Temperature resistant from -20°C to +75°C
- Very good sprayability
- UV- and weather-resistant
- Can be used indoors and outdoors
- Permanently elasto-plastic (max. 12.5% elongation)
- Excellent adhesion without primer
- Wet stains can be removed with water

Preparation
Processing conditions: Only process at temperatures
between +5°C and +40°C.
Surface requirements: Surfaces must be thoroughly dry, clean and free of dust, rust and grease.
Preliminary treatment surfaces: For better adhesion on porous (strongly
porous substrates, these should first be coated with a diluted
acrylic solution (1 part sealant to 2 parts water). For a good result, tape the edges
of the joint with masking tape. Ensure a minimum joint width
of 6 mm. Up to 12 mm joint width, the joint depth should be 6 mm. For larger
joint widths, the joint depth is half the joint width. Given the large
variety of types of
(wall) paints, it is advisable to check in advance
test the compatibility of the paint on the sealant.
kit beforehand. Remove paint tape immediately after smoothing.
Tools: Apply the cartridge with a caulking gun. Use Multi Tool for opening the cartridge
opening the cartridge and smoothing out the sealant.

Processing
Consumption: Contents suitable for approx. 8-15 metres (depending on joint diameter).
of the joint).
Instructions for use:
Process tube with sealant gun. Open the cartridge by cutting off the plastic nipple
cutting off the plastic nipple at the top with a sharp knife up to the thread. Screw on the nozzle
and cut off at an angle at the desired opening. Ensure a minimum
joint width of 6 mm and a maximum of 24 mm. The depth of the joint should be 6
to 9 mm. Spray sealant evenly into the joint and within 5 minutes with
with a moistened putty knife or Bison Multi Tool. The applied
tape immediately after smoothing. After 5 minutes a surface
surface skin. The sealant is paintable after 30 minutes. In view of the large
variety of types of
(wall) paints it is advisable to first check the
test the compatibility of the paint on the sealant.
test beforehand.
Stains/Residue: Remove wet stains immediately with water. Cured
residues can only be removed mechanically.

Only for manufacturing defects.

Right of return

You have a trial period of 14 days. If the product is not to your satisfaction, you may return it to us. The product can only be returned if the outer packaging (seal) is closed.