Data

Information

Product description
Glue gun for DIY and semi-professional use

Application area
Glues many porous and non-porous materials in seconds, such as wood, metal
stone, glass, tiles, ceramics, leather, textiles and many plastics. With a high
melting capacity and is suitable for DIY and all household
repairs. Glues almost all materials quickly, neatly, permanently and reliably.
Ideal for making, repairing, insulating and sealing. For example carpets,
shoe soles and heels, mounting battens, skirting boards or gluing a loose tile.
Multifunctional. Not suitable for Not suitable for PE, PP, PTFE and must
use on heat-sensitive materials.
Not suitable for load-bearing parts or parts
which are constantly under tension

Properties
- Strong, fast and easy
- Weatherproof
- Heat resistant up to approx. +70°C
- Does not shrink, does not age
- Solvent-free
- Resistant to UV light, detergents and cleaning agents
- Good electrical insulating properties
- Crevice-filling

Preparation
Processing conditions: When using this glue gun, always follow the
follow safety precautions. This will prevent the possibility of incidental injury
prevent the possibility of burns or electric shock.
Personal protection: Contact with hot nozzle or the molten
glue may cause burns. Keep the device out of the reach of
children. Never try to speed up the cooling process by holding the gun under the
tap. Always allow it to cool naturally. Check the
cord regularly for damage or breaks. For safety reasons, do not use the glue gun
do not use if damaged.
Surface requirements: The materials to be glued must be thoroughly dry, clean,
be free of dust and grease. If necessary, roughen smooth surfaces before applying
application of adhesive so that the adhesive adheres better.
Pre-treatment surfaces: The materials to be glued must be well
dry, clean, dust- and grease-free. If necessary, roughen smooth surfaces before
before applying adhesive to improve adhesion.

Processing
Instructions for use:
Place the gun in the support bracket and plug in.
Insert a glue stick Ø 11 mm into the glue gun and let it heat up for 5-8
minutes. Squeeze the trigger to apply the glue to the harder material,
do not apply to the thin material.
Press the parts firmly within 15-20 seconds. Bonding takes place
within 2 minutes (depending on the thickness of the adhesive layer). The final strength
is reached after 2 hours.
Important: place a new adhesive cartridge behind the previous one in good time to
prevent overheating. Avoid contact with the hot nozzle. If the
glue gun is not used for 60 minutes or longer, remove
the plug from the socket.
Apply the glue streakwise on flexible material and in dot or
stripewise on hard material. Large surfaces are difficult to join together
to join, as the adhesive may solidify before the entire surface is
worked on. For strength, it is best if the parts are joined as soon as the adhesive is
applied are joined.
Stains/residues: Cured adhesive residues can only be removed mechanically.
remove.
Points of attention: The glue gun should be placed on the support bracket
when not in use. Never remove glue from the glue gun, the
mechanism may be damaged. Never insert other objects into the
glue gun other than the recommended glue sticks.

Only on manufacturing defects.

Right of return

You have a 14-day trial period. If the product is not to your satisfaction, you can return it to us. The product can only be returned if the outer packaging (seal) is closed.