Data
| Brand: | Bison |
| Model: | Glue spray |
| Moisture resistance: | Good |
| Viscosity: | approx. Liquid |
| Solids content: | approx. 22% |
| Colour: | Transparent |
| Content: | 500ml |
| Delivery: | 1 spray can |
Information
Product description
Bison Glue Spray is a contact adhesive for bonding large surfaces. Adheres alternatively permanently or removably. Suitable for bonding various materials, also suitable for Styrofoam®. Even spray pattern - powerful adhesive application. Spray valve does not clog.
Area of application
For permanent or temporary bonding of paper, cardboard, photos, posters, reproductions, collages, metal foils (aluminium foil) and for temporary fixing of stencils. Can also be used for bonding decorative materials, such as: polyether foam/foam rubber (cushions in furniture), felt, textiles, leather, cork, polystyrene foam (Styrofoam), among themselves and on wood, board, chipboard, glass, concrete and metals. Not suitable for PE, PP.
Properties
- For temporary and permanent fixing
- Easy to use
- Fast and strong
- Moisture-resistant
Preparation
Processing conditions: Do not process at temperatures below +10°C.
requirements surfaces: Both parts must be clean, dry and grease-free.
Processing
Consumption: 2.5 m2/500 ml, applied on both sides
Instructions for use:
Shake spray can well before use.
Permanent connection:
Directly fixed: Apply adhesive thinly and evenly on both surfaces. Canister
20-25 cm from the surface to be bonded. Allow glue to dry for at least 10 minutes, bring parts together and press or tap. Correcting is no longer possible.
Temporary/Correctable joint:
Apply adhesive to only one of the surfaces (not the substrate). Allow to dry for at least 20 minutes, bring parts together and press. The bonded object is now self-adhesive and can be removed and reapplied.
Stains/Residue: Remove wet stains with benzene. Soak dry stains in benzene
points of attention: The technical data indicated apply to the basic adhesive without propellant. After spraying, hold the can upside down and press the spray can until only propellant and no more glue comes out. This prevents clogging of the aerosol can. Pressurised container. Protect from sunlight and do not expose to temperatures exceeding 50°C. Do not
pierce or burn, even after use. Throw away only when completely empty.
Do not breathe vapour. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - Do not smoke. Without adequate ventilation accumulation of potentially explosive alloys possible. Keep out of reach of children.
Drying times*
* Drying times may vary depending on, among other things, substrate, quantity of product applied, moisture content and ambient temperature.
Storage conditions
Minimum 24 months after production. Opened packaging has a limited
shelf life. Store tightly closed in a dry, cool and frost-free place.
Warranty
Only for manufacturing defects.
Right of return
You have a trial period of 14 days. If the product is not to your satisfaction, you can return it to us. The product can only be returned if the outer packaging (seal) is closed.
