Data
| Brand: | Bison |
| Model: | Hard PVC Glue |
| temp.resistance: | +60 °C, peak load 95 °C |
| Chemical resistance: | The chemical resistance of adhesive joints depends on the gap width, drying time, pressure, temperature, type and concentration of the carrier. The adhesive bond generally has the same chemical resistance as the material itself. Exceptions are a small number of highly aggressive chemicals such as concentrated acids, caustic solutions and strong oxidising agents. |
| Basic raw material: | Solution of PVC in a mixture of solvents |
| Viscosity: | approx. 600 mPa.s., Liquid |
| Solids content: | approx. 21% |
| Density: | approx. 0.91 g/cm³ |
| Flash point: | K1 (<21°C) |
| Colour: | Colourless (transparent) |
| Content: | 250ml |
| Delivery: | 1 piece |
| Attachment: | Performance declaration.pdf |
Information
Product description
Seamless, liquid, THF-free hard PVC adhesive.
Field of application
For bonding pipes, sleeves and fittings with tight fits in
drainage systems. Suitable for diameters ≤ 160 mm. Maximum tolerance 0.3
mm gap fitting / 0.2 mm press fit. Suitable for e.g. pipe systems
in accordance with EN1329, 1453 and 1455.
Properties
- With special brush
- With quick-release fastener
- THF-free
- Washable
- Liquid
Approvals/Standards
Approvals: CE: Adhesive for non-pressure thermoplastic piping systems in
installations for the transport/disposal/storage of water (EN 14680).
KOMO: Adhesives for joints in unplasticised indoor sewer systems.
PVC. Certificate K4395 based on BRL 5221 (EN 14680).
Standards: EN 14680: Meets requirements European standard 14680:
Adhesive for non-pressure thermoplastic piping systems.
Preparation
Processing conditions: Do not process at temperatures ≤ +5°C.
Processing
Consumption: Indication of number of adhesive joints per 1 L.
Instructions for use:
1. Cut pipes squarely, chamfer and deburr. 2. Glue surfaces
clean with acetone and a clean, lint-free cloth. 3. Apply adhesive quickly and
evenly all round (4-6x) on both bonding surfaces (pipe thick, sleeve
thin). 4. Mount the joint immediately. Connection can be adjusted for some time.
Remove excess adhesive. Do not mechanically stress the joint for the first 10 minutes.
first 10 minutes. Close packaging tightly immediately after use.
Stains/Residue: Remove glue stains with acetone and a clean, non
lint-free cloth.
Storage conditions
Minimum shelf life of 24 months if stored in tightly closed
packaging in a dry place, at a temperature between +5°C and +25°C.
Opened packaging has a limited shelf life.
Warranty
Only on manufacturing faults.
Right of return
You have a trial period of 14 days. If the product is not to your satisfaction, you can return it to us. The product can only be returned if the outer packaging (seal) is closed.
