Data
| Brand: | Bison |
| Model: | Max Repair Extreme |
| Moisture resistance: | Very good |
| temp.resistance: | -40°C to +120°C |
| Chemical resistance: | Good |
| Filling capacity: | Very good |
| UV resistance: | Good |
| Paintable: | Good |
|
Elasticity: |
Very good |
| Basic raw material: | SMP Polymer |
| Viscosity: | Approx.Pasty |
| Solids content: | approx. 100% |
| Density: | approx. 1.1g/cm3 |
| Colour: | Transparent |
| Content: | 20 g |
| Delivery: | 1 piece |
Information
pRodUctoMscHRijVing
Bison Max Repair Extreme is an innovative universal adhesive for 1,001 repairs in and
around the house. Max Repair is extremely strong, extremely elastic, water-resistant and filling.
application area
Max Repair Extreme is an extremely strong adhesive for repairing porous and non-porous materials such as wood, textiles, leather, cork, metal, glass, plastic, rubber, ceramic tiles, bricks, cement and many other materials. Suitable for indoor and outdoor use. Max Repair Extreme is based on the Bison Polymer Technology. Products based on this technology guarantee a universal, strong, exible, durable, safe and user-friendly solution for daily use. Not suitable for
suitable for PE, PP, PTFE.
properties
extremely strong
extremely elastic
water-resistant
dishwasher-proof
filling
paintable
shockproof
temperature resistant -40°C to +120°C
UV-resistant
joint remains elastic
transparent
solvent-free and acid-free
APPLICATION
Processing conditions: The materials to be bonded must be clean, dry, dust- and grease-free.
Preliminary treatment surfaces: Lightly sand metals. For optimum results, first degrease with Bison Kit® Degreaser / Thinner.
VeRweRking
Instructions for use:
Can be applied directly from the tube using the jne dosing tip. Make sure the surfaces to be glued are clean, dry, dust- and grease-free. Apply the adhesive on one side.
Press the parts together. Corrections can be made within 5 minutes. Maximum final strength is reached after approx. 24 hours.
Stains/Residue: Remove adhesive stains immediately with Bison Degreaser/Thinner for Bison Kit®.
tips: Unscrew stuck cap under the hot tap and remove any cured adhesive in the tube cap with a sharp knife. After use, leave a little glue above the tube before screwing on the cap.
dRogging times*
Hand-holding time: approx. 15 minutes
Drying/curing time : approx. 4-24 hours. This may vary depending on
conditions, such as temperature and humidity.
Storage conditions
Opened packaging has limited shelf life. Store tightly closed packaging in a dry, cool and frost-free place.
Warranty
Only for manufacturing defects.
Right of return
You have a 14-day trial period. If the product is not to your satisfaction, you can return it to us. The product can only be returned if the outer packaging (seal) is closed.
