Data
| Brand: | Bison |
| Model: | Mirror glue |
| temp.resistance: | -40°C to +100°C |
| Moisture resistance: | Very Good |
| Water resistance: | Good |
| Paintability: | Good |
| Filling capacity: | Very Good |
| Basic raw material: | SMP polymer |
| Viscosity: | approx. Tixotropic |
| Solids content: | approx. 100% |
| Density: | approx. 1.46 g/cm³ |
| Flash point: | K3 (>55°C) |
| Colour: | White |
| Content: | 100g |
| Delivery: | 1 piece |
Information
Product description
Glues (silver) mirrors to all kinds of substrates. Does not affect the coating. - Moisture-resistant.
Field of application
For bonding traditional (silver) mirrors to all kinds of substrates.
Properties
- Acid-free
- Does not affect the coating
- Permanently elastic
- Water-resistant
Preparation
Processing conditions: Only process at temperatures between +5°C and +40°C.
requirements surfaces: Both parts must be firm, clean, dust- and grease-free. Use of primer not necessary. Substrate may be slightly moist.
Processing
application instructions:
Apply mirror glue in vertical stripes (any moisture cannot drain behind the mirror if there are horizontal stripes of mirror glue) every 20 cm on the back of the undamaged mirror. Mount the mirror within 10 minutes and then press firmly. The space behind the mirror should be and remain well ventilated. Support large mirrors for 24 hours using a batten or tape until the glue has fully cured.
Stains/Residue: Use white spirit to clean tools and remove wet glue residues. Dried adhesive residues can only be removed mechanically.
Points of attention: Do not apply the sealant in a circular form, but in vertical stripes. Sufficient air must be allowed to reach the adhesive.
Storage conditions
At least 12 months after production. Opened packaging has a limited
shelf life. Store tightly closed in a dry, cool and frost-free place.
Warranty
Only for manufacturing defects.
Right of return
You have a trial period of 14 days. If the product is not to your satisfaction, you can return it to us. The product can only be returned if the outer packaging (seal) is closed.
