Data
| Brand: | Bison |
| Model: | Montagekit Direct Grip Tape |
| Moisture resistance: | Very good |
| Temp.resistance: | -10°C to +75°C. |
| Chemical resistance: | Good |
| Basic raw material: | Synthetic resin/rubber with polyester fibre |
| Width: | 48mm |
| Length: | 10m |
| Thickness: | 0.73mm |
| Colour: | Yellow / Transparent |
| Delivery: | By piece |
| Box Contents: | 6 pieces |
Information
Product description
Double-sided mounting tape with extremely high initial tack, for
indoor and outdoor applications. Fixing without nails or screws.
Fabric reinforced. Easily tearable.
Area of application
Ideal for quick and easy fixing of skirting boards, letter boxes, etc,
sheet material, tiles, nameplates, house numbers, smoke detectors,
hooks, electrical boxes and accessories. Also suitable for
decorative ornaments and trim made of polyurethane and polystyrene foam
on both smooth and rough substrates.
Properties
Extremely high initial tack: 120 kg/roll
- Very high final strength
- Reinforced fabric
- Easy to tear
- On smooth and rough substrates
- Easy to apply
- Universally applicable
- Temperature resistant -10 to +75°C
- Moisture-resistant
- Transparent
Preparation
Processing conditions: Apply to a substrate, which
has approximately the same temperature as the tape and the environment. For the
optimal adhesion, apply the tape at a temperature of approx. +15°C
to +35°C. To be processed at a relative humidity of 40 - 70 %.
Surface requirements: Both parts must be firm, dry, clean and dust- and
grease-free. One of both parts must be porous (absorbent).
Processing
Consumption: smooth substrate: 1.5 cm per kg, rough substrate: 8 cm per kg
Instructions for use:
1. Apply sufficient tape to the object (depending on the substrate:
1.3 cm per 1 kg on smooth substrates, 2 cm per 250 g on rough
substrates).
2. Remove the protective film. Place the object directly on the correct
place and press firmly for at least 10 seconds. Initial adhesion is
dependent on the substrate and ambient conditions.
Stains/Residue: Remove tape residues with white spirit.
Tips: Use Bison Montagekit Original Tape for extra strong fastening of all kinds of
of all kinds of materials on all kinds of substrates in indoor and outdoor
applications.
Use Bison Double Fix® or Bison Double Fix® Removable for fixing accessories in sanitary areas.
mounting accessories in sanitary areas.
Drying times*
Final strength after: approx. 24 hours.
* Drying times may vary depending on, among other things, substrate, applied quantity of product,
moisture content and ambient temperature.
Guarantee
Only for manufacturing defects.
Right of return
If you do not like the product or the colour is not right, you can only return the product when the outer packaging (seal) is closed.
