Data
| Brand: | Bison |
| Model: | Montagekit Super |
| temp.resistance: | -20°C - +80°C |
| Water resistance: | Limited |
| Paintability: | Very Good |
| Filling capacity: | Good |
| Chemical resistance: | Good |
| UV resistance: | Very Good |
| Basic raw material: | Acrylic dispersion |
| Viscosity: | approx. Pasty |
| Solids content: | approx. 75% |
| Density: | approx. 1.5 g/cm³ |
| Colour: | Cameo |
| Content: | 440g |
| Delivery: | 1 piece |
Information
Product description
Extra strong, solvent-free assembly adhesive based on acrylic dispersion.
For fast and rock-solid fixing of wood, plastic, metal, stone,
plaster, tiles and polystyrene foam on porous substrates such as concrete, stone,
plaster, wood and chipboard. Permanently elastic and filling. Nails and
screws are superfluous.
Field of application
Suitable for mounting all kinds of (building) materials such as wood, stone
concrete, metal, many plastics and polystyrene foam on porous (absorbent)
substrates of stone, concrete, wood, plaster, plasterboard, etc. Also
extremely suitable for surface bonding, which improves the initial adhesion.
Very suitable for fixing e.g. battens, skirting boards, thresholds,
panelling (wood/plastic), panelling, window sills, ceramic
tiles, sheet material, plasterboard, finishing battens, wall cladding boards
panels, insulation material, soft- and hardboard boards, panels, sills
nameplates, house numbers, hooks, cable trays, sockets and
electrical boxes.
Also suitable for decorative materials, such as ornaments and decorative strips of
plaster, polyurethane and polystyrene foam. Not suitable for PE, PP, PTFE,
bitumen, mirrors, natural stone, permanently damp locations and the fixing
of a non-porous material on a non-porous substrate. When
always carry out an adhesion test first. The adhesion
on plastic can vary depending on the type of plastic and the quality of
the plastic.
Properties
- Very high final strength
- Easy to process
- Filling
- Especially for indoor use
- Solvent-free
- Permanently elastic
- Universally applicable
- Suitable for uneven substrates
- Correctable
- Moisture-resistant
- Temperature resistant
Preparation
Processing conditions: Only process at temperatures
between +5°C and +40°C.
Surface requirements: Both parts must be firm, dry, clean and dust- and
grease-free. One of both parts must be porous (absorbent).
Tools: Canister with sealant gun (e.g. Bison Power Pistol).
Processing. If necessary, use a rubber hammer to tap. For
glue with a glue comb (2 mm).
Processing
Consumption: Wall cladding boards and panels: approx. 5 - 8 m²/kg depending on
the weight of the material. Battens, skirting boards and battens: approx. 4 - 6 m²/kg.
bonded surface.
Instructions for use:
Before use, open the tube at the top by opening the plastic nipple above
the thread, using a sharp knife. Then attach the nozzle
and cut it at an angle to the desired diameter. Glue evenly,
depending on the weight of the material, every 20 to 30 cm in dots or
stripes. Always apply adhesive to corners and along edges.
In case of surface bonding, apply adhesive thinly and evenly on one side with an
glue comb. Mount materials directly with a sliding movement and press or tap firmly.
firmly. Corrections are still possible. With heavy materials
fixate or support if necessary.
Stains/Residue: Use water for cleaning tools and
removing wet adhesive residues. Dried adhesive residues can only be
mechanically.
Tips: We recommend Bison Montagekit Original for fixing
materials under tension.
We recommend Bison Poly Max® for fixing a non-porous
material on a non-porous substrate.
We recommend Bison Poly Max® for fixing materials in places
with a permanently high humidity level and/or long-term contact with
water.
For fixing natural stone, we recommend Bison Poly Max®.
Drying times*
Final strength after: approx. 24 hours
* Drying times may vary depending on, among other things, substrate, applied quantity of product,
moisture content and ambient temperature.
Storage conditions
Minimum 24 months after production. Opened packaging has a limited
shelf life. Store tightly closed in a dry, cool and frost-free place.
Warranty
Only for manufacturing defects.
Right of return
You have a 14-day trial period. If the product is not to your satisfaction, you can return it to us. The product can only be returned if the outer packaging (seal) is closed.
