Data
| Brand: | Bison |
| Model: | Wood & Floor Sealant 300ml |
| temp.resistance: | -20°C to +75°C |
| Moisture resistance: | Good |
| Water resistance: | Limited |
| Paintability: | Very Good |
| Filling capacity: | Good |
| UV resistance: | Good |
| Elasticity: | Limited |
| Basic raw material: | Acrylic emulsion |
| Viscosity: | approx. Pasty |
| Density: | approx. 1.72 g/cm³ |
| Solids content: | approx. 86 % |
| Shrinkage: | approx. 14 % |
| Max. permissible deformation: | approx. 12.5 % |
| Colour: | Classic |
| Content: | 300ml |
| Delivery: | 1 piece |
| Ombox in holds: | 6 pieces |
| Appendix: | Declaration of performance.PDF |
Information
Product description
High-quality, colour-specific sealant for connection joints on parquet
laminate, plank, cork, linoleum and PVC floors.
Also highly suitable for filling connecting joints to skirting boards, thresholds and other
skirting boards, thresholds and other building components.
Field of application
Suitable for connection joints along walls, radiator pipes, etc., extremely
suitable for places where skirting boards cannot be used. Also
also for sealing joints on stairs and other wooden structures.
Properties
- Plastic-elastic (max. 12.5% elongation)
- Paintable
. Sandable
- Colourfast
. Temperature resistant between -20°C and +75°C
- Moisture-resistant
- Non-corrosive to metals
- Easy to apply
- Odourless
Preparation
Processing conditions: Process only at temperatures
between +5°C and +40°C.
Surface requirements: Surfaces must be thoroughly dry, clean and free of dust, rust and grease.
Preliminary treatment surfaces: Surfaces must first be dry, clean and free of dust and grease. For best results, tape off joint edges with masking tape.
with painter's tape.
Tools:
- Bison Multi Tool
- Bison Power Pistol
- Joint tape / Painting tape
Processing
Consumption: Content suitable for approx. 8-15 metres (depending on the diameter
of the joint).
Instructions for use:
Process tube with sealant gun. Open the cartridge by cutting off the plastic nipple
cutting off the plastic nipple at the top with a sharp knife up to the thread. Screw the nozzle
and cut off at an angle at the desired opening. Apply sealant with a
spray kit gun evenly into the joint and smooth it out within 5 to 10 minutes
with a (damp) finger or sealant spreader. Remove masking tape immediately after smoothing and
and close the cartridge. A surface skin will form after 5 minutes.
Curing 1 mm in 24 hours, depending on relative humidity and
temperature. Paintable and sandable after complete curing. Content
suitable for approximately 15 m of joint measuring 6x6 mm.
Stains/Residue: Remove excess sealant residues immediately with a wet cloth,
Mechanically remove cured sealant residue.
Tips: For the most beautiful joint, use Bison Joint Tape.
Points of attention: Store cool, frost-free and well sealed. Shelf life
Minimum 24 months. Limited shelf life after opening
Drying times*
Skin formation time: approx. 5 min.
Depth of cure: approx. 1 mm/24 hrs.
* Drying times may vary depending on, among other things, substrate, applied quantity of product,
moisture content and ambient temperature.
Storage conditions
24 months limited Store in tightly closed container in a dry place
at a temperature between +5°C and +25°C.
Warranty
Only for manufacturing defects.
Right of return
You have a trial period of 14 days. If the product is not to your satisfaction, you can return it to us. The product can only be returned if the outer packaging (seal) is closed.
