Data
Brand: |
edding |
Model: |
5200 Spray head set |
Colour: |
|
|
|
Delivery: |
Per Set of 6 pieces |
Information
From a fine line to large areas: versatility is our strength! That's why we offer an adapter set with interchangeable nozzles. Fine, medium, wide or variable. Choose the right one for your needs for a customised spray width. The edding 5200 permanent spray nozzle set... lets your ideas run wild!
- Interchangeable nozzles in 4 different spray widths from fine lines to large areas for the optimal elaboration of creative ideas
- The set includes nozzles in spray widths fine (approx. 1 cm), medium (approx. 4-5 cm), wide (approx. 8-10 cm) and variable (approx. 13-14 cm)
- Nozzle can be adjusted horizontally/vertically
- Only compatible with edding 5200 permanent spray (except edding 5200 permanent spray rust effect)
- 2x nozzle white: spray width fine (approx. 1 cm)
- 2x nozzle black: spray width medium (approx. 4-5 cm)
- 1x nozzle gold: spray width wide (approx. 8-10 cm)
- 1x nozzle red (professional): spraying width extra wide (approx. 13-14 cm). The nozzle can be positioned horizontally and vertically
- High-quality branded product
- Made in Germany
- The spray can should be at room temperature (15-25 °C). If possible, spray outdoors or in a well-ventilated area. When spraying indoors, ensure that surrounding surfaces are well covered. Tape off all parts that do not need to be painted
- The object you are going to spray should be dry, clean and free of grease or rust particles. Remove large surface imperfections with a scraper or by sanding. Use edding primers for plastic and polystyrene or edding universal primer (keep an eye on the drying time).
- To remove the safety ring, first remove the cap and then the nozzle. The outer edge of the safety ring can then be lifted using a screwdriver or similar tool. Take care not to damage the canister in doing so
- Shake the spray can vigorously for approx. 3 minutes so that you can clearly hear the rattling of the mixing balls. Shake the paint again and again, even after short interruptions during painting
- Always carry out a spray test first on, for example, a newspaper or masking paper. Start spraying outside the edge of the object at a spraying distance of 25 cm from the object. Press the spray nozzle firmly while moving. Hold the spray can vertically and move it up and down slowly and evenly, making the backward movement away from the object (for vertical and horizontal movements)
- Smaller areas are best sprayed all at once, in a spiralling motion working from the centre to the sides
- If necessary, apply another layer of spray paint using the wet-on-wet technique where you apply a new layer of paint while the previous layer is still wet, i.e. at intervals of 1-2 minutes
Warranty
Only on manufacturing defects.
Right of return
You have a 14-day trial period, should you not like the product or the colour is not right, you can only return the product when the outer packaging (seal) is closed.